Home Buying Guides A Buying Guide for the Best Lawn Mower Blades for Cub Cadet

A Buying Guide for the Best Lawn Mower Blades for Cub Cadet

by Jackson White

A mowers top system is designed to do one function which is to operate the blades in such a way that they will trim the grass as required. When upgrading the blades of your cub cadet it is important that you get the right sizes and the correct number, you will, therefore, find that mowers either have two or three blades all of which must be replaced with matching blades.

Your mower can either offer a perfect finish or it can miss some strips of grass leaving your lawn with a funny look, more like several Mohawk cuts. Non-matching blades for your lawn mower will also affect the unit’s functionality in that you will not be able to trim a wide area because the blades continuously make more passes and you will, therefore, have to work harder.

The appropriate mower blades are usually much heavier, you also need to get blades that will fit the spindle, remember that here you have about four different options the six-point star, the five-point star, the universal fit, and the bow tie. If you, therefore, don’t get the right blade for your mower, installation is going to be difficult. Below is a list of the best lawn mower blades for the cub cadet.

Comparison Table

Name
Used by
Specifications
Check on Amazon
Premium 2 in 1 blade for the 46in cutting decks
Cub Cadet, MTD Gold, White outdoor, Remington, Troy-Bilt
For mulching and side discharge
Oregon 3 Pack 98-091 Mower Blade Fits Cub Cadet 942-04416 01005337P
Murray M155-34, Troy Super Bronco 50, Cubs Cadet ZT1, ZT2. Cub Cadet XT1 and XT2 Enduro Series GT50
Grass collection systems and bagging grass clippings
MTD 942-04385 Replacement Part 30" 3-in-1 Blade
Troy-Bilt TB30 and TB30R, Cub cadet, Yard Machines, Rear engine mini riding mowers
Bags, side discharges, and mulch’s grass clippings
8TEN LawnRAZOR Hi-Lift Blade for MTD Cub Cadet
Compatible with Z-force L48, Z-Force S48, Z-Force 48
Can bag or throw grass clippings along a distance
MaxPower 561544B 2-Blade Set for 46 Inch Cut MTD/Cub Cadet/Troy-Bilt
Replaces OEM no. 742-04244, 742-04244A, 742-04290.

Troy-Bilt, Cub Cadet, MTD
Expels grass clippings

Premium 2 in 1 blade for the 46in cutting decks – perfect for different brands of mowers

The premium 2 in 1 blade has been designed to be used specifically for side discharging or for bagging the grass clippings

Specs

  • Blade type- High lift
  • Blade length- 23.25in
  • Deck cutting width- 46in and 46in fabricated
  • Blade category – premium

The premium 2 in 1 blade works best when used for side discharging; these types of mowers prevent the accumulation of grass, which tends to assume a glue-like nature by hardening and consequently damaging the mower. In essence, therefore, is that both the side discharge and the mulching mower will leave the cut grass behind and the only difference between the two is that the mulching blade will ensure that the grass clippings are finely chopped, and will, therefore, not clump quickly but decompose faster.

So for people who are using the side discharge mower, and want to achieve finer clippings, you will have to run over the grass piles a couple of times. The above then brings us to the next question, is it possible to use mulching blades with a side discharge, yes it is indeed possible to use a side discharge with mulching blades as it will limit the formation of clumps of grass that occur under the blade.

Pros

  • Can be used with Lawn tractors, and the RZT mowers
  • The blades are best when used for bagging grass
  • Can be used on different series of Cub Cadets
  • The blades fit the different series of the craftsman, the Huskee LT 4600 and the White door LT2200.

Cons

  • The metal is weak thus bends easily

Verdict

The premium 2 in 1 blade for 46-in cutting decks are versatile can, therefore, be used by many different types of mowers.

View price on Amazon

 

Oregon 3 Pack 98-091 Mower Blade Fits Cub Cadet 942-04416 01005337Ppowerful blades for different kinds of environment

The Oregon 3 pack 98-091 are the high lifts type of blades best for the grass collection systems and the bagging of grass clippings.

Specs

  • Blade type 2 in 1
  • Deck cutting width 34 in and 50 in
  • Blade length 17.30 in
  • Blade category- standard

Mower blades are available in two types, the standard and mulching blades, for new users it might be hard to tell them apart but if you know how the blades work then it would be easy. The standard blades aka the 2 in 1 blade are meant for cutting grass after which they will either discharge or bag the clippings, a good example being the Oregon 3pack 98-91 mower blades.

Mulching blades, on the other hand, are the 3 in 1 blade and are normally used to mulch grass clippings, bag, or discharge. If you take a closer look at the mulching blade, you will notice that they have a curved surface and an increased cutting edge, this design enables the blade to cut the grass and bring it to the deck where it gets cut several more times and then falls back to the lawn in smaller pieces.

Pros

  • Can be used with the different types of mowers
  • Their design enables efficiency
  • Are strong and durable

Verdict

The Oregon 3 pack 98-091 blades are a 2 in 1 mowing blade for cutting then discharge or bag the grass.

View price on Amazon

 

MTD 942-04385 Replacement Part 30″ 3-in-1 Blade –Sharp blades perfect for a fine finish

There is a reason why the MTD 942-04385 is called a replacement blade, and it is because they are versatile, in that they can perform up to three jobs. They can, therefore, discharge clippings, or finely chop them and then leave them on the lawn to decompose.

Specs

  • Blade type 3 in 1
  • Deck cutting width 30in
  • Blade length 30 in
  • Blade category- standard

The advantage of using a mulching blade is that the grass clippings always seem to disappear instead of being strewn all over. The 3 in 1 mowing blades are, therefore, characteristic of sharp cutting edges along most of its surface, the above, is what makes the grass clippings to keep circulating under the mower deck, which then makes the mower to repeatedly cut the clippings into much smaller pieces.

Additionally, the 3 in 1 blades are fond of creating a circulating air stream which then pulls and directs the clippings towards the blades after they have been cut. So if you decide to invest in a mulching mower, one fact that you must always keep in your mind is that the blades will not work effectively when you need them to bag or discharge grass clippings.

Pros

  • Performs up to three functions during mowing
  • Mulching gives the nutrients back to the soil
  • Mulching reduces weed infestation
  • Mulching prevents water from drying out

Cons

  • Mulching blades cannot be used on overgrown grass because they may end up clogging under the deck
  • The MTD 942-04385 blades are not very sturdy and durable

 

View price on Amazon

 

8TEN LawnRAZOR Mulching Blade for Cub Cadet 48 Inch Deck –Perfect blades for heavy-duty chores

The lawn razor Hi-Lift toothed blades are compatible with three brands of mowers and these are the MTD, the Cub Cadet, and the Troy Bilt. The blades are a product of high-quality control standards with premium manufacturing materials.

Specs

  • Deck Size 48in
  • Length 17in
  • Center holes ¾ in
  • Width 3in

If you have thick grass and have been wondering how best you can clear it without going through the stress of trying different blades then the Lawn Razor should do the magic. If you take a closer look at the construction of the blades then you will realize that it is toothed on the ends and can, therefore, handle the tough jobs, more so the heavy-duty mulching jobs for tall grass and weeds.

Remember, however, that the 8Ten Lawn Razor mulching blade doesn’t work best when used in the overly wet areas, because as the blades trim the grass, they end up in smaller particles and become pulp-like, thus clog your mower.

Pros

  • Fits well with the relevant lawnmower and have a good lift
  • The blades are sharp, does a good job
  • Puts the nutrients back to the soil, so no more burning of leaves or grass
  • Works well on the tough type of grass

Cons

  • Not convenient for the long term

Verdict

The 8ten is good mulching that can be used by different mower brands including the cub cadet, the sharp blades are best for working with the tough types of grass.

View price on Amazon

 

8TEN LawnRAZOR Hi-Lift Blade for MTD Cub Cadet – perfect blades for dense tall grass

Mowing blades as we have already established perform different kinds of jobs, the 8Ten lawn Razor high lift blades have, therefore, been designed to either bag or throw the grass clippings a long distance.

Specs

  • Deck size 48 inches
  • Dimensions 18 x 4 x 4 inches
  • Blade Width 3”
  • Blade Length: 16 15/16″

The advantage of using the 8TEN Hi-Lift blades is that they perform very well when used on thick grass; however, users will have to ensure that they have the necessary horsepower if they want to get the job done effectively.

Also consider the type of soil in your lawn before using this type of mower, as they don’t work very well in sandy or loose soil. What we are, therefore, saying is that the greater the lift, the more horsepower that will be required, so if you have taller and dense grass in your lawn then this is the right type of blade that you should adopt and the good thing is that it can fit with different types of lawns.

Pros

  • High lift blades are effective as they create enough suction to circulate and expel clippings.
  • High airflow prevents clogging when mowing tall or wet grass
  • Always provide the best quality cut
  • The mower side discharge clippings nice and far

Verdict

Distinguishing between a high lift blade and a low lift blade is not the easiest of things, so a simple process would be to put them on the ground and check to see the blade that has an upward curve, the back of the high lift blade is normally angled higher than the other blades thus makes grass cutting a breeze.

View price on Amazon

 

MaxPower 561544B 2-Blade Set for 46 Inch Cut MTD/Cub Cadet/Troy-Bilt

The Max power 561544B are the uniquely styled high lift blades that feature large wind wings necessary for increased airflow.

Specs

  • Product dimensions 24.63 x 3 x 0.63 inches
  • Size: 23 1/4″
  • Includes 2 46” blades
  • Center hole adapts to 6 points star

Whether or not you should use a high lift blade on your cub cadet mower is totally dependent on how tall or dense the grass in your lawn is. And while the low lift blades work better on shorter grass, the high lift blades don’t have exceptions and will, therefore, work on almost all types of grass and in all conditions.

Pros

  • Can be used with different brands of mowers
  • The blades are sharp thus effective
  • The blades are sturdy and strong

Cons

  • Price on is on the higher side

Verdict

High lift blades are perfect for different types of grass and conditions; all you need to do is get a mower that will match the blades like the Cub cadet or the Troy Bilt mowers.

View price on Amazon

 

Final Thought

Now there is one thing that lawn mower owners need to understand when it comes to the mower blades, in this case, the 2 in 1 and the 3 in 1; any equipment that is all-purpose always has to compromise on one of its functionality features, at least when compared to equipment that have been designed and dedicated to doing a specific job. So for the 3 in 1 blade, the process of airflow recirculation affects the blades in that they are not very efficient when it comes to discharging clippings.

You may also like

Leave a Comment